Cinnamon Oil – Technical Data Sheet (TDS) and Specifications

Complete product identification, physico-chemical specification, GC composition, safety, storage and packing data for cinnamon leaf and bark oil

Both grades are 100% pure essential oils, with no added solvent, carrier or synthetic adulterant. Supplied by Liana Health Care Pvt. Ltd., Meerut, Uttar Pradesh, India.

Values are typical ranges. Actual results for each lot are reported on the batch Certificate of Analysis (COA).

Composition varies with origin and harvest. A full GC-MS report is supplied on request.

• Certificate of Analysis (COA), supplied with every batch.
• GC / GC-MS report, including coumarin and safrole, on request.
• Material Safety Data Sheet (MSDS), available on request.
• IFRA and allergen information (eugenol, cinnamal, linalool and others), on request.
• Batch traceability with batch number and date on every pack.
• Pre-shipment sample available for bulk and export orders.

Classification can vary by batch. Always confirm with the batch MSDS.

• Pack range: 100 ml to 200 kg
• Small packs: 100 ml, 250 ml, 500 ml aluminium or amber glass bottles
• Medium packs: 1 kg and 5 kg aluminium bottles
• Bulk packs: 25 kg and 50 kg lined HDPE cans, up to 200 kg lined drums
• Labelling: product name, grade, batch no., date, net weight and hazard symbols
• Private label: custom bottles, labels and cartons on request

• Candles, reed diffusers and room sprays
• Potpourri refresher oils and festive products
• Soaps and rinse-off products at low levels
• Agarbatti and dhoop perfumes
• Food, bakery, beverage and oral care flavours (licensed buyers)
• Aromatherapy diffuser blends

For food or flavour use, please discuss your requirement and the applicable food regulations with us.

The information in this Technical Data Sheet is provided by Liana Health Care Pvt. Ltd. in good faith and is based on our current knowledge, laboratory data and published reference values. It is intended only as general guidance for qualified professional buyers and formulators.

• Typical values: All figures are typical ranges. Being a natural essential oil, values may vary between batches due to origin and harvest. Batch-specific results are stated only on the COA supplied with each consignment.
• Not a contractual specification: This document does not form part of any contract of sale unless confirmed in writing. Agreed specifications are those in our quotation, proforma invoice or COA.
• Buyer responsibility: Buyers must confirm the suitability of this product for their own formulation and end use, and ensure that finished products comply with all applicable laws, IFRA limits for eugenol and cinnamaldehyde, food regulations and labelling requirements.
• No therapeutic claims: Applications mentioned are general fragrance, flavour and household uses only. Nothing in this document is medical advice or a claim to treat or prevent any condition.
• Limitation of liability: Liana Health Care Pvt. Ltd. accepts no liability for loss, damage or injury arising from misuse, improper storage or use of this information beyond its intended purpose.
• Updates: We may revise this document without prior notice. Please contact us for the latest revision.

© Liana Health Care Pvt. Ltd., Meerut, Uttar Pradesh, India. This document may not be reproduced or altered without written permission.

Cinnamon Oil Uses and Starter Formulations for Startups and Learners

Use levels, choosing the grade and 6 practical formulas for candles, reed diffuser, potpourri oil, soap, room spray and agarbatti

• Startups and small brands planning spice candles, reed diffusers, potpourri, soaps, room sprays or agarbatti with cinnamon oil.
• Students and learners in candle making, home fragrance, soap making and incense.
• Small manufacturers testing products at 100 g to 1 kg scale before bulk production.
• Why cinnamon: a warm, festive, comforting aroma that sells strongly in winter, Diwali and Christmas seasons.
• All formulas are given in % w/w and grams, so they scale up easily. 1% = 1 g in a 100 g batch.

Cinnamon oils are strong skin irritants. Always weigh in grams, wear gloves, keep away from eyes and children, and follow IFRA limits. Bark oil is best kept for licensed flavour use and fine fragrance at very low levels.

A best-selling festive and winter candle.

Batch size: 200 g (one candle jar)

Method

1. Fix a suitable wick in the centre of the jar.
2. Melt the wax to the temperature your wax supplier advises (usually 75–85°C).
3. Remove from heat, add the oils and stir gently for 2 minutes.
4. Pour at the advised pouring temperature, keep the wick centred and cure 3 to 5 days.

Formulator tips

• Spice oils can slightly change wick burn, so test burn before a full batch.
• Orange and cedarwood round off the sharp spice.

Caution: Never leave a burning candle unattended. Keep away from children, pets and anything that can catch fire.

A cosy home fragrance and popular gift product.

Batch size: 100 ml (one 100 ml diffuser)

Method

1. Weigh the diffuser base into a glass beaker.
2. Add the oils and stir until clear.
3. Rest for 24 hours, fill into a glass bottle and add 6 to 8 reed sticks.

Formulator tips

• Flip the reeds every few days to refresh the scent.
• Keep away from polished wood, as spice oils can mark surfaces.

Caution: Keep out of reach of children and pets. Do not drink. Avoid skin contact with the liquid.

A high-margin oil for refreshing potpourri, pine cones and dried flowers.

Batch size: 100 g of oil

Method

1. Mix the oils with DPG in a glass beaker.
2. Rest for 24 hours, then fill into small dropper bottles.
3. Add 5 to 10 drops to potpourri or pine cones and refresh once a week.

Formulator tips

• Pack as a gift set with a bag of potpourri.
• Label clearly: "For potpourri only, not for skin".

Caution: Not for skin use. Keep out of reach of children and pets. Do not drink.

An easy festive soap with no lye handling. Uses a low level of leaf oil.

Batch size: 1 kg (about ten 100 g bars)

Method

1. Cut the soap base into cubes and melt at 60–65°C. Do not boil.
2. Cool to about 55°C, add the oils and ground cinnamon and stir gently.
3. Pour into moulds, spray with rubbing alcohol, set 2 to 4 hours and wrap at once.

Formulator tips

• Keep cinnamon leaf oil at 0.5% or below to avoid skin irritation.
• Ground cinnamon can feel scratchy above 0.2%.

Caution: Keep away from eyes. Stop use if irritation occurs. Not for babies or sensitive skin.

A warm, welcoming spray for homes, shops and offices.

Batch size: 100 ml

Method

1. Mix Polysorbate 20 with the oils until clear.
2. Slowly add the water while stirring.
3. Add the preservative and fill into fine-mist spray bottles.

Formulator tips

• If cloudy, raise Polysorbate 20 to 4% and reduce water.
• Label: "Shake well before use".

Caution: Spray into the air only. Not on skin, face, eyes, fabrics or pets.

A warm, festive perfume for dipping blank incense sticks and dhoop cones.

Batch size: 1 kg of dipping oil

Method

1. Mix the oils with the solvent in a steel container.
2. Dip dry blank sticks until evenly soaked.
3. Dry in the shade for 24 hours and pack in airtight pouches or boxes.

Formulator tips

• Test burn a few sticks before packing a full batch.
• Wear gloves when dipping, as cinnamon oil can irritate hands.

Caution: Flammable. Work away from flames. Burn in a ventilated area and keep out of reach of children.

Quality checks

• Keep one sample at 40–45°C for 2 to 4 weeks and check for colour or smell changes, and retain a sample of every batch.

Labelling

• Show product name, ingredients, net quantity, batch number, manufacturing and expiry dates, and manufacturer details.
• List allergens such as eugenol, cinnamal and linalool where required.
• Add "Keep away from skin and eyes" on home fragrance products and avoid medical claims.

Common mistakes

• Using cinnamon bark oil in skin products.
• Storing cinnamon oil in iron containers, which darkens it.
• Using too much cinnamon in a blend, so it overpowers everything else.

• Trial packs from 100 ml for R&D, bulk packs up to 200 kg for production.
• Cinnamon oil plus clove, orange, cedarwood and soap bases from one supplier.
• White label and contract manufacturing for brands without their own factory.